PriceSensitive

Boron One completes mineral processing study for Piskanja borate project

Market News
TSXV:BONE
16 November 2026 08:31 (EST)

Source: Stock image generated with AI.

Key Highlights

Boron One Holdings Inc. (TSXV: BONE) says it has completed a mineral processing study for its Piskanja Borate Project, supporting the technical feasibility of a conceptual processing facility designed to treat about 250,000 tonnes per year of run-of-mine material and produce a high-grade colemanite concentrate.

The company said the study was prepared by Mineral Mine Backfill Technologies d.o.o. (MMBT), in cooperation with the Technical Faculty in Bor at the University of Belgrade, and forms part of the technical documentation required for the projects exploitation field approval process. Boron One said the work provides a basis for future engineering, capital cost estimation and development planning.

This article is a journalistic opinion piece which has been written based on independent research. It is intended to inform investors and should not be taken as a recommendation or financial advice.

According to the release, the study developed a process flowsheet and selected industrial equipment to treat colemanite ore grading about 25% B2O3 at a design throughput of 35 tonnes per hour, with a proposed concentrate grade of about 40% B2O3.

The company said the study evaluated a gravity-based flowsheet that includes crushing, screening, attrition scrubbing, centrifugal concentration, shaking table cleaning, thickening, filtration and process-water recirculation. Based on the study assumptions and metallurgical test work, Boron One reported estimated annual concentrate production of about 141,150 tonnes, overall B2O3 recovery of about 86%, and recirculation of about 90% of process water.

Boron One also highlighted that the proposed beneficiation process relies principally on gravity separation and mechanical treatment techniques rather than conventional chemical beneficiation reagents.

Tim Daniels, President and Director, said, “A particularly encouraging outcome of the Study is that the proposed flowsheet relies primarily on gravity separation and mechanical treatment methods using conventional equipment, while achieving commercial-grade concentrate specifications without the use of conventional chemical beneficiation reagents.”

The release noted that Nenad Rakic, EurGeol, a Qualified Person under National Instrument 43-101, reviewed and approved the scientific and technical information in the news release, including the technical information summarized from the study.

Boron One cautioned that the metallurgical recoveries and concentrate grades presented are based on laboratory and pilot-scale testing and may not be representative of actual operating conditions. It also said the study was prepared for engineering and project development purposes and does not constitute a Preliminary Economic Assessment, Pre-Feasibility Study or Feasibility Study as defined under National Instrument 43-101.

The original press release is available on stockhouse.com

Related News