PriceSensitive

Forge Resources reports 2026 Alotta Project drill results

Market News
CSE:FRG
10 November 2026 08:31 (EST)

Source: Stock image generated with AI.

Key Highlights

Forge Resources Corp. (CSE: FRG) (OTCQB: FRGGF) (FSE: 5YZ) released results and interpretations from its 2026 diamond drilling campaign at the Alotta Project in Yukon’s Dawson Range Gold Belt. The company said the 2026 drill program confirmed strong alteration and veining at the Commission target that it interprets as indicating proximity to a prospective porphyry centre, and it also reported continued vein-hosted and disseminated gold mineralization at the Payoff and Severance zones. This article is a journalistic opinion piece which has been written based on independent research. It is intended to inform investors and should not be taken as a recommendation or financial advice. Forge reported it drilled 2,791.24 metres in six holes at the three zones, completing the 2026 program at Alotta. It also reported that, to date, it has completed 8,137 metres of drilling in 21 drill holes across four main targets, and that mineralization and alteration have been intersected in every hole drilled at Alotta so far.

Payoff Zone drilling

Forge said step-out drilling at the Payoff Zone now totals 3,328 metres in nine holes, and that 2026 drilling extended the known strike length of the target to about 700 metres. The company described the Payoff Zone mineralization as including mineralized stringers and veinlets, with localized polymetallic veins. In hole ALT-26-020, Forge reported 70 m grading 0.51 g/t Au starting from 213 m depth, including 0.3 m grading 4.44 g/t Au starting from 217 m depth and 31.75 m grading 0.63 g/t Au starting from 237 m depth. In hole ALT-26-016, it reported 85 m grading 0.42 g/t Au starting from 229 m depth, including 9 m grading 1.0 g/t Au starting from 277 m depth and 10 m grading 0.71 g/t Au starting from 314 m depth. The release notes that reported intervals are drilled core lengths and that additional drilling is required to establish true widths.

Commission and Severance zones

Forge said drilling at the Commission Zone now totals 1,976 metres in four holes, and that 2026 drilling encountered sheeted and stockwork-style veining with associated alteration to depths greater than 600 m below surface. The company also highlighted molybdenum results it considers notable, including 0.007% molybdenum over 78 m in hole ALT-26-018 and 95.5 m grading 0.009% molybdenum in hole ALT-26-021, including 20 m grading 0.01% molybdenum. At the Severance Zone, Forge reported one 2026 hole (ALT-26-019) and highlighted an interval of 42 m grading 0.18 g/t Au, 0.46 g/t Ag and 0.03% Cu. The technical information in the release was reviewed and approved by Kelson Willms, P.Geo., of Archer, Cathro & Associates (1981) Limited, identified as a Qualified Person under National Instrument 43-101, according to the company.

The original press release is available on stockhouse.com

Related News