Key Highlights
- Americore Resources completed eight reverse-circulation drill holes at its Trinity Silver Project in Nevada.
- The 2026 program totalled about 3,435 feet (1,047.0 metres), with holes drilled to 250-560 feet.
- Samples were sent to American Assay Laboratories, with results to be released after review.
Americore Resources Corp. (TSXV: AMCO) (OTCQB: AMCOF) (FSE: 5GP) has completed its 2026 reverse-circulation drilling program at the Trinity Silver Project in Pershing County, Nevada, the company announced.
Americore drilled eight holes (TR-P01 through TR-P08) for a total of approximately 3,435 feet (1,047.0 metres). The company said drill targets were selected using historical drilling information, geological interpretation, silver mineralization patterns, a three-dimensional geological model and field-access considerations. No assay results were included in the release.
This article is a journalistic opinion piece which has been written based on independent research. It is intended to inform investors and should not be taken as a recommendation or financial advice.
Americore reported that final hole depths ranged from about 250 feet to 560 feet, and that the drilling footage table it provided does not represent mineralized intervals. The company also noted that final depths are based on field drilling records provided by the site team.
Samples from the program have been shipped to American Assay Laboratories in Sparks, Nevada, for analysis. Americore said it intends to report assay results when available and after the company completes a technical review.
In the release, Chief Executive Officer Justin Hanka said, “With drilling now complete, our attention turns to the assay results and integrating new observations with our existing geological model.”
Americore said the new drill information will be evaluated alongside historical drill data and the existing three-dimensional model to refine geological interpretation, assess continuity and determine which areas may warrant follow-up. The company added that any future conclusions regarding Mineral Resources would require consideration of analytical results, geological continuity, data quality and subsequent resource-estimation work.
The company said the scientific and technical information in the release was reviewed and approved by Claudia Elena Olvera Prado, MAusIMM, a Qualified Person and a consultant to Americore. Americore also said collar locations shown in a project figure are based on working field coordinates used during the 2026 program and have not been independently surveyed by the Qualified Person.
Read the original press release on Stockhouse.com.
s-17v5_h-18v5_i-19v5